• 訪問中文版
    400 9933 952
    13291195999
    Adsorption Concentration+CO Catalytic CombustionPosition:Home > Exhaust gas treatment equipment

    Adsorption Concentration+CO Catalytic Combustion

      Activated carbon adsorption+CO catalytic combustion is a highly respected waste gas purification technology in the current environmental protection industry. It combines the adsorption and desorption characteristics of activated carbon and the low-temperature energy-saving characteristics of catalytic combustion. When treating mixed waste gases with different concentrations and components, it can easily meet the emission standards stipulated by the environmental protection department. Therefore, it is highly praised and has broad prospects.


    2. [Adsorption Concentration+CO Catalytic Combustion] Process Principle

    Organic exhaust gas enters the activated carbon adsorption chamber under the action of induced draft fan. Because activated carbon has many microporous, large specific surface area and strong adsorption capacity, organic exhaust gas is adsorbed in the microporous of activated carbon, and clean air is discharged at this time.


    After a period of time, the activated carbon saturates and stops adsorbing. At this time, the organic waste gas is concentrated in the activated carbon adsorption layer. Then we use catalytic combustion technology to desorb and regenerate the saturated activated carbon and put it back into use.

    The organic waste gas with high concentration, low air volume and high temperature desorbed by activated carbon filters into a special plate heat exchanger and exchanges energy with the high temperature gas after catalytic reaction. At this time, the temperature of the exhaust gas source is raised for the first time, and then the gas with a certain temperature enters the preheater for the second time.

    In the first stage of catalytic reaction, the organic waste gas is partially decomposed at low temperature, and the energy is released. The waste gas source is directly heated to raise the temperature to the optimum temperature of catalytic reaction.


    Only after the temperature detection system meets the temperature requirement of the catalytic reaction can it enter the catalytic combustion chamber. The organic waste gas is thoroughly decomposed in the reaction process, and a large amount of heat is released at the same time. The purified gas converts heat energy to cold air through a heat exchanger, and the clean gas is exhausted by an induced draft fan.

    Organic matter maintains spontaneous combustion by using the heat released from oxidation combustion. If the concentration of desorbed exhaust gas is high enough and CO does not need electric power heating under normal conditions, it can achieve real energy saving and environmental protection. At the same time, the whole device is safe, reliable and no secondary pollution.

    3.3. Scope of Application of Adsorption Concentration+CO Catalytic Combustion

    The combined process of adsorptive concentration and RCO catalytic combustion can be used to treat organic waste gases produced in various industrial fields such as painting, printing, electromechanical, household appliances, shoemaking, plastics, chemical workshop, etc.


    Direct combustion, catalytic combustion and adsorptive desorption should not be used to recover organic waste gases with concentration ranging from 50 ppm to 1000 ppm. In the field of exhaust gas purification with large air volume, the combined process equipment of adsorption concentration and RCO catalytic combustion can make enterprises obtain satisfactory economic and environmental benefits.


    4. Characteristic of [Adsorption Concentration+RCO Catalytic Combustion] System

    1. The equipment has advanced principle, unique material, stable performance, simple operation, safety and reliability, energy saving and labor saving, no secondary pollution, small occupation area and light weight. The adsorption bed adopts drawer structure, which is convenient for filling and replacement.

    2. Compared with granular activated carbon, honeycomb activated carbon, a new type of activated carbon adsorption material, has superior dynamic performance and is very suitable for use in high air volume.

    3. Noble metal catalysts supported by honeycomb ceramics are used in the catalytic combustion chamber with low resistance and high activity. When the concentration of organic waste gas is above 2000 ppm, it can maintain spontaneous combustion.

    4. Low power consumption. Because of the small resistance of the bed, low-pressure fan can be used. It not only consumes less power but also has low noise. The power of exhaust fan is shown in the attached table.

    5. When catalytic combustion occurs, it needs electric heating to start. After the start of catalytic combustion, the combustion heat energy of organic compounds can be enough to maintain the temperature required for the reaction. At this time, the electric heating stops by itself. The starting time of electric heating is about one hour. The power required for starting is shown in the attached table.

    6. Activated carbon bed adsorbing organic waste gas, desorption and regeneration with catalytic combustion waste gas, desorbed gas is sent to catalytic combustion chamber for purification, no external energy is needed, operation cost is low, and energy saving effect is remarkable.

    5. Equipment-related parameters

    蜂窩活性炭吸附濃縮+RCO催化燃燒設備型號

    蜂窩活性炭吸附濃縮+RCO催化燃燒設備型號

    蜂窩活性炭吸附濃縮+RCO催化燃燒設備型號

    • Treatment of Stench Waste Gas from Hepburn Pharmaceutical Industry Treatment of Stench Waste Gas from Hepburn Pharmaceutical Industry View more cases
    • Treatment of Plastic Granulation Waste Gas from Suzhou Mandarin New Material Treatment of Plastic Granulation Waste Gas from Suzhou Mandarin New Material View more cases
    • Microwave Treatment of Waste Gas from Plastic Packaging in Yueda, Suzhou Microwave Treatment of Waste Gas from Plastic Packaging in Yueda, Suzhou View more cases
    • RCO Catalytic Combustion Process of Waste Gas from Wanda Plastic Printing RCO Catalytic Combustion Process of Waste Gas from Wanda Plastic Printing View more cases
    • Pulse Cloth Bag Dust Removal Project of Suzhou Academy of Electrical Sciences Pulse Cloth Bag Dust Removal Project of Suzhou Academy of Electrical Sciences View more cases
    Simple products
    Serivce
    Project
    Product
    Equipment principle
    Service idea
    Dynamics
    Industry news
    New case
    Human resources
    Online notice
    Contact us
    Free Hot Line400 9933 952
    ©2022 Suzhou Huaxi Environmental Protection Technology Co., Ltd. Copyright
    E-mail:wjs@szhxep.com
    Mobile:13291195999
    蘇ICP備15053602號 Technical support:Huaxi Group
    Wechat consultation Mobile access
    Suzhou Huaxi Environmental Protection CopyRights
    乌克兰精品无码av毛片,人妻 丝袜美腿 中文字幕,国产卡二卡三卡四卡免费第一番,欧美日韩一卡2卡三卡4卡 乱码欧美孕交 ,无码H肉3D樱花动漫在线观看 国产丰满成熟女人性满足视频| 国产一卡二卡四卡无卡国色在线差差| 国产女人高潮抽搐叫床视频| 无码H肉3D樱花动漫在线观看| 国产AV综合一区二区三区 | 欧美日韩一卡2卡三卡4卡 乱码欧美孕交 | 四虎影院在线观看| 国产XXXX农村野外高潮HD| 国产99re6在线视频播放| 国产XXXX农村野外高潮HD| GOGO西西人体大尺寸大胆高清| 亚洲国产精品久久人人爱| 国产卡二卡三卡四卡免费第一番| 国产精品 欧美激情 在线播放| 国产免费无码一区二区视频| 性色高清XXXXX厕所偷拍| 色一情一乱一伦一区二区三区| 非洲人交乣女BBWBabes| 免费A片吃奶玩乳视频出水| 久久人人爽人人爽人人片av高清| 精品无码av一区二区三区不卡| 少妇仑乱A毛片| 少妇仑乱A毛片| 中字卡1卡2卡3卡4卡5卡6| 最爽的乱婬视频a毛片| 综合Av人妻一区二区三区| 欧美大片18禁AAA片免费| 国产精品videossex久久| 67194熟妇人妻欧美日韩| AV色综合久久天堂AV色综合在| 亚洲大尺度AV无码专区在线观看 | 性色高清XXXXX厕所偷窥| 黑人巨大XXXX娇小| 中字卡1卡2卡3卡4卡5卡6| 人妻 丝袜美腿 中文字幕| 欧美777精品久久久久网| 国产日产精品国产精品毛片| 极品尤物旗袍自慰喷白浆|